DITRA-HEAT-PS Peel & Stick Membrane Sheet 3′ 2-5/8″x2′ 7-3/8″ = 8.4 SF
Description
Schluter®-DITRA-HEAT-PS is a peel-and-stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric floor warming with the same functions associated with DITRA-HEAT: uncoupling, waterproofing*, vapor management, and load support to ensure a long-lasting tile installation.
DITRA-HEAT-PS combines the flexibility of loose heating cables with the ease of installation of mat systems. Cables can be placed wherever heat is desired, without creating height differences in the floor.
• Cables can be snapped into place wherever heat is desired, which significantly reduces installation time and effort.
• For optimal performance with difficult-to-bond-to substrates, use Schluter®-PRIMER-U or another suitable primer.
• Tile directly over Ditra-Heat or pour self-leveler over the top to install alternate floor coverings like:
* Engineered Wood, floating or glued-down
* Laminate
* Luxury Vinyl Tile & Plank (LVT/LVP)
* Vinyl
* WPC or Wood Plastic Composite core flooring
* SPC or Stone Plastic Composite core flooring
Membrane installation is even easier now without thin-set under the mat using Peel & Stick. To install, peel the release film off DITRA-HEAT-PS and place the membrane on the substrate. It can be lifted and re-positioned providing no pressure has been applied to it. However, once pressure has been applied the adhesive sticks the membrane firmly to the substrate. The heating cables can be installed immediately after adhering the membrane to the subfloor.
This is the SHEETof Peel & Stick Ditra-Heat membrane; it is also available in Sheets and DUO, also with Peel and Stick adhesive.
* The stud structure of DITRA-HEAT is specifically designed to allow for the easy installation of DITRA-HEAT-E-HK heating cables
* Nominal 1/4″ (5.5 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings
* Self-leveling compounds are not required to encapsulate the cables into the membrane
* Available by the roll or by the sheet to accommodate various room sizes
* Quick and easy to install and few tools are required
All the benefits at a glance:
✔ Quick – No mixing and spreading mortar underneath – Immediately load bearing after installation
✔ Easy – Peel off the adhesive liner and set the membrane in place. Easily repositioned during installation until pressure is exerted on the top
✔ Great for small projects
✔ Waterproof if you seal the joints and edges with KERDI-Band
✔ Available in Sheets and Rolls
Waterproof your installation with KERDI-BAND (sold separately); cover all joints, seams, and corners of the membrane to completely waterproof the installation before applying thin-set and tile.