All in One Floor Heating Kit with 64 sq ft Cable, 103 sq ft PEEL & STICK Membrane, Touchscreen Programmable Thermostat (120V)

Description

This DITRA-HEAT Kit contains everything you need to install a complete floor heating system:

• 1 Spool of DITRA-HEAT Cable (DHEHK12064) – Warms 64 sq ft
• 1 DHERT102/BW Programmable Thermostat (touchscreen)
• 2 Sensor Wires
• 12 DITRA-HEAT (DHPS5MA) PEEL & STICK Uncoupling Membrane Sheets – Covers 103 sq ft

DITRA-HEAT-PS-Membrane SHEET – Peel & Stick for Quick & Easy installation.

Schluter®-DITRA-HEAT-PS is a peel-and-stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric floor warming with the same functions associated with DITRA-HEAT: uncoupling, waterproofing*, vapor management, and load support to ensure a long-lasting tile installation.

Membrane installation is even easier now without thin-set under the mat using Peel & Stick. To install, peel the release film off DITRA-HEAT-PS and place the membrane on the substrate. It can be lifted and re-positioned providing no pressure has been applied to it. However, once pressure has been applied the adhesive sticks the membrane firmly to the substrate. The heating cables can be installed immediately after adhering the membrane to the subfloor.

• Cables can be snapped into place wherever heat is desired, which significantly reduces installation time and effort.

• For optimal performance with difficult-to-bond-to substrates, use Schluter®-PRIMER-U or another suitable primer.

• Tile directly over Ditra-Heat or pour self-leveler over the top to install alternate floor coverings like:

Engineered Wood, floating or glued-down
Laminate
Luxury Vinyl Tile & Plank (LVT/LVP)
Vinyl
WPC or Wood Plastic Composite core flooring
SPC or Stone Plastic Composite core flooring

Note: Product shown is a kit put together by Authorized Distributor Warm Your Floor containing individual genuine Schluter® products.

Installation Instructions

All substrates must be clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT. For complete installation guidelines and warranty criteria, please refer to the downloadable Instruction Manual (↖ linked above) or to the installation video online.

Note: Type, thickness, and format of the tile or stone surface covering must be at least 2″ x 2″ (5 cm x 5 cm).