Mostly BEKOTEC
-
Vendor:Schluter
Schluter BEKOTEC-THERM-RH 75 Heating Tube Clamp PVC Plastic (Pack of 100)
Schluter-BEKOTEC-THERM-RH 75 is a fastener used to secure radiant heating tubes to 1 3/8" (35 mm) thick BEKOTEC-EN/US/P panels. The studs in the BEKOTEC panels secure the tubes in place, while the clips are used to hold them at a 45? angle to the...- $0.00
- $0.00
- Unit price
- per
-
Vendor:Schluter
Schluter BEKOTEC-BRS/KF Adhesive Edge Strip Polyethylene Foam 5/16" (8 mm) x 3-1/8" x 82'
The Schluter-BEKOTEC-BRS/KF is an edge strip for poured screeds, with a polyethylene-adhesive leg. Roll measures 82' (25 m) long Dimensions of strip are 3-1/8" (8 cm) wide and 5/16" (8 mm) thick Features one adhesive strip for fastening to wall and one adhesive leg...- $165.13
$165.13- $165.13
- Unit price
- per
-
Vendor:Schluter
Schluter BEKOTEC-BRS Edge Strip Polyetyhlene Foam 5/16" (8 mm) x 3-1/8" x 164'
Schluter-BEKOTEC-BRS strips can be installed at the perimeter of conventional screeds, at floor/wall transitions, or at fixed structures. 164' (50 m) roll 3 1/8" (8 cm) wide and 5/16" (8 mm) thick strips Polyethylene strips with an integrated fabric edge- $87.44
$87.44- $87.44
- Unit price
- per
-
Vendor:Schluter
Schluter BEKOTEC Modular Screed Panel Polystyrene 1-3/8" (35 mm) x 24" x 48" (Pack of 12)
The Schluter-BEKOTEC family of products are lightweight modular screed systems that are used to create continuous screed surfaces without control joints or reinforcement and can also accommodate hydronic radiant heating tubes. Produces permanent, internally stress-free assemblies by confining contraction and curing forces to smaller...- $235.07
$235.07- $235.07
- Unit price
- per
-
Vendor:Schluter
Schluter BEKOTEC-F Studded Screed Panel Polystyrene 29/32" (23 mm) x 35-7/16" x 47-1/4" (Pack of 10)
The Schluter-BEKOTEC family of products creates continuous lightweight modular toppings without reinforcement or control joints, as well as radiant heated floor assemblies. Produces permanent, internally stress-free assemblies by confining contraction and curing forces to smaller modules Controls deformations, such as warping and cracking, common...- $364.38
$364.38- $364.38
- Unit price
- per
-
Vendor:Schluter
Schluter BEKOTEC-BRS/KSF Adhesive Edge Strip 5/16" (8 mm) x 3-1/8" x 82'
The Schluter-BEKOTEC-BRS/KSF is a self-supporting edge strip for poured screed, with a polyethylene adhesive leg.Installation : If a poured screed is to be applied, the Schluter-BEKOTEC-BRS/KF or -BRS/KSF edge strip with adhesive leg is used. The-BRS/KF edge strip is attached to the wall using...- $222.95
$222.95- $222.95
- Unit price
- per
-
Vendor:Schluter
Schluter BEKOTEC-DRAIN Studded Screed Drainage Panel 29/32" (23 mm) x 35-7/16" x 47-1/4" (Pack of 10)
The Schluter-BEKOTEC family of products creates continuous lightweight modular toppings without reinforcement or control joints, as well as radiant heated floor assemblies. Produces permanent, internally stress-free assemblies by confining contraction and curing forces to smaller modules Controls deformations, such as warping and cracking, common...- $393.53
$393.53- $393.53
- Unit price
- per
-
Vendor:Schluter
Schluter DILEX-DFP Movement Joint Profile for Dividing Screed Surface 3' 3" x 2-3/8" (60 mm)
Schluter-DILEX-DFP is a movement joint profile that can be installed at doors or to divide screed surfaces. For use with BEKOTEC modular screed systems 3/8" (10 mm) thick 3' 3" (1 m) long Available in three heights- $16.85
$16.85- $16.85
- Unit price
- per
-
Vendor:Schluter
Schluter DILEX-DFP Movement Joint Profile for Dividing Screed Surface 3' 3" x 3-1/8" (80 mm)
Schluter-DILEX-DFP is a movement joint profile that can be installed at doors or to divide screed surfaces. For use with BEKOTEC modular screed systems 3/8" (10 mm) thick 3' 3" (1 m) long Available in three heights- $20.21
$20.21- $20.21
- Unit price
- per
